Product description, features and application domain information
The Aluminum gravity cast cylinder head still has a portion of its interior made of cast iron, especially the cylinder, made of cast iron.The thermal expansion rate of cast aluminum and cast iron is not uniform after fuel combustion, which is usually referred to as deformation consistency.When the engine is working, the cast-aluminum cylinder engine equipped with cast iron cylinders must meet the sealing requirements.How to solve this problem is a special concern of aluminum casting companies.Manufacturers who are good at selling products often use the "all aluminum engine" halo to lead the way in promoting their own automobile products.For this reason, we can see that both audi A8, focus and swift have locked the bright spots of their engines into the all-aluminum cylinder.It is undeniable that the aluminum engine is superior to the cast iron engine in material, heat dissipation and other aspects.
Place of Origin
Auto Cylinder Head
Sandblasting, painting, polishing
T6 heat treatment
A356 A360 AC2C
From 0.05kg to 20kg
Gravity Casting machine -23 Sets
Intake Manifold,Cylinder Head,Pump series
Supply capacity and package transportation
100000 Piece/Pieces per Month
Company strength profile
We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.
We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.
Nitrogen making machine refers to the equipment that USES air as raw material and USES physical methods to separate oxygen and nitrogen in it to obtain nitrogen.According to different classification methods, namely, cryogenic air separation method, molecular sieve air separation method (PSA) and membrane air separation method, nitrogen production machines used in industry can be divided into three types.Nitrogen generator is a nitrogen production equipment designed and manufactured according to pressure swing adsorption technology.High purity nitrogen was prepared by using high quality imported carbon molecular sieve (CMS) as adsorbent and pressure swing adsorption principle (PSA) at room temperature.Generally, two adsorption towers are connected in parallel, and the imported pneumatic valve is controlled by the imported PLC to run automatically. The pressure adsorption and decompression regeneration are carried out alternately to complete the nitrogen and oxygen separation, and the nitrogen with high purity is obtained.
We have professional testing personnel to use a variety of equipment to control the quality of products
Used for making peritoneal sand tensile and flexural standard samples.It can be widely used in production, scientific research and teaching.This prototype takes intelligent temperature control instrument and precise timer as the core, and carries out digital control on the temperature of upper and lower moulded samples respectively, providing stable temperature output, and convenient timing control of precise insulation time.Sample size: tensile: 22.36×11.1 bending: 22.36×11.18×70 sample preparation temperature: room temperature -400℃(service temperature 232℃) temperature control accuracy: ±5℃ timing time range: 0-99 minutes 99 seconds working voltage: AC 220V± 10%,50Hz
We have a strong professional technical team and r & d strength, as well as a variety of certificates.
1.What do you mainly produce？
We only make aluminum products.Mainly is the automobile cylinder head, the intake manifold, the robot parts, the water pump fittings and each kind of aluminum industry parts.
2.What should I prepare if I have a product to produce and need to quote?
Tell us your annual consumption,Send us the 2d and 3d drawings of the product you want to produce,Then we will give you a quote based on this information.