OEM Customized Sand 3D Printer & Spare Part Auto Engine Block Cylinder Head Cover Bracket Housing by Rapid Prototyping with 3D Printing Sand Casting & Machining

Product description, features and application domain information

Front pump bracket.Diaphragm pump according to the use of its actuator power, can be divided into pneumatic, electric, hydraulic three kinds, namely compressed air as a power source of pneumatic diaphragm pump, electric diaphragm pump as a power source, to liquid medium (such as oil, etc.) pressure driven by the electric hydraulic diaphragm pump.The function of diaphragm pump in process control is to accept the control signal of the regulator or computer, change the flow rate of the regulated medium, so that the adjusted parameters are maintained in the required range, so as to achieve the automation of the production process.If the automatic adjustment system is compared with the manual adjustment process, the detection unit is the human eye, the adjustment control unit is the human brain, then the executive unit -- diaphragm pump is the human hand and foot.To achieve the process of a certain parameter such as temperature, pressure, flow, liquid level control, are inseparable from the diaphragm pump.Therefore, it is of great significance to choose diaphragm pump correctly in process automation.

Basic Parameter

Supply capacity and package transportation

Company strength profile

Customer

We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.

Process

We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.

Erformance parameters: the printing area: 100 x80mm, 140 x80mm200x150mm (or custom) printing speed: 3-5 characters per second (5 x7) software application system: windows98windowsXP print depth: 0.01 to 1.2 mm can be adjusted (depending on the material) to ensure accuracy, error of 0.01 or less height adjustment range: 1-330 - mm automatic storage: can be automatically stored file and print content source:0.5 0.7 Mpa, 3 l/S simulations show: directly observe marking effect on the screen print needle impact frequency: 300 times/SEC print contents: Chinese and English characters, Numbers and graphics editor) (by marking software graphic editor: serial number (serial number), automatic printing, automatic storage \ with duplicate detection, to recognize the barcode printing material: all kinds of metal (below HRC85 hardness), all kinds of hard materials (PVC film, plastic, bakelite, etc.) the machine power: 300 w working voltage: 220 vac.

Quality control

We have professional testing personnel to use a variety of equipment to control the quality of products

The stone washing machine is also called the sand washing machine (or the sand washing machine), which is used in the construction site, the sand and stone plant, the prefabrication plant and the hydropower site to desilt and screen a lot of sand and stone, and can also be used in the ore sorting machine.Stone washing machine can be roughly divided into spiral stone washing machine, roller stone washing machine, water wheel stone washing machine, vibrating stone washing machine, bucket type stone washing machine, cylinder stone washing machine.Stone washing machine is for dredging, sand mining out of the sand for cleaning, mainly using water for cleaning.In the bottom of the river or rock after mining up the sand and more impurities, the need for water to wash the sand in the soil and sand separation, to achieve the purpose of purification.The assembly is transported to the chamber of the stone washer, and then according to the technical Settings of the chamber, rolling, shaking and other movements are carried out, and the high-pressure water gun is used to spray water to wash, the washed soil or through the water hole to remove, and the sand is dried.

Technical strength

We have a strong professional technical team and r & d strength, as well as a variety of certificates.

FAQ

1.What do you mainly produce？

We only make aluminum products.Mainly is the automobile cylinder head, the intake manifold, the robot parts, the water pump fittings and each kind of aluminum industry parts.

2.What should I prepare if I have a product to produce and need to quote?

Tell us your annual consumption,Send us the 2d and 3d drawings of the product you want to produce,Then we will give you a quote based on this information.