Nickel-Based Super Alloy Gas Turbine Housing

Product description, features and application domain information

New energy gravity casting housing.The gas composition is single, the purity is high, can mix with the air evenly and the combustion is complete, the emission of CO and the particle is low, the engine starts at low temperature and the operation performance is good.Its disadvantages include poor transport performance compared with liquid fuel, low volume efficiency of engine, long ignition delay and reduced power performance.These vehicles use a dual-fuel system, a compressed natural gas or liquefied petroleum gas (LNG) system and a gasoline or diesel combustion system. They can easily transition from one system to another.Using air as the energy carrier, an air compressor is used to compress the air to more than 30MP and then store it in the gas storage tank.The compressed air is released to drive the starting motor when the car needs to be started.Advantages are no emissions, less maintenance, disadvantages are the need for power supply, air pressure (energy output) with the increase of mileage and attenuation, high pressure gas safety.

Basic Parameter

Supply capacity and package transportation

Company strength profile

Customer

We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.

Process

We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.

Its rigidity is good, large - scale jig boring machine USES this kind of structure.The main parameter of the double-column jig boring machine is the width of the work table.Horizontal jig boring machine: the table can do rotation movement in the horizontal plane, feed movement can be achieved by the table longitudinal movement or spindle axial movement.Its machining accuracy is higher.

The deep hole drilling and boring machine itself is strong rigidity, the accuracy is maintained well, the spindle speed range is wide, the feed system is driven by the ac servo motor, can adapt to the needs of various deep hole processing technology.Oil feeder fastening and workpiece jacking using hydraulic device, instrument display, safe and reliable.1. Workpiece rotation, tool rotation and reciprocating feed movement, suitable for drilling and small diameter boring;2. Workpiece rotation, cutting tools do not rotate only reciprocating movement, suitable for boring large diameter hole and nesting processing;3. The workpiece does not rotate, the cutter rotates and the reciprocating feed movement, which is suitable for the drilling of complex workpiece and the drilling of small diameter and the boring of small diameter.

Quality control

We have professional testing personnel to use a variety of equipment to control the quality of products

Elliptical screen is a vibrating screen with elliptical motion trajectory, which has the advantages of high efficiency, high screening accuracy and wide range.Compared with the ordinary sieving machine of the same specification, it has larger processing capacity and higher screening efficiency.It is suitable for solvent and cold sinter screening in metallurgical industry, ore grading in mining industry, dewatering and deintermediation in coal industry, etc.It is an ideal substitute for the existing large vibrating screen and imported products from abroad.TES triaxial elliptical vibrating screen is widely used in quarries, sand and stone screening operations, but also for coal dressing, dressing, building materials, construction, power chemical industry for the classification of products.

Screening principle: the power is transferred from the motor through the triangle belt to the shaker drive shaft and gear vibrator (the speed ratio is 1), realizing the rotation of the three shafts at the same speed, generating the excitation force, and the shaker is connected with the high-strength bolt of the screen box to produce elliptical motion.Material on the screen with the high speed elliptical motion screen machine, quickly stratified, through the screen, forward, and finally complete the classification of materials.

Technical strength

We have a strong professional technical team and r & d strength, as well as a variety of certificates.

FAQ

1.What do you mainly produce？

We only make aluminum products.Mainly is the automobile cylinder head, the intake manifold, the robot parts, the water pump fittings and each kind of aluminum industry parts.

2.What should I prepare if I have a product to produce and need to quote?

Tell us your annual consumption,Send us the 2d and 3d drawings of the product you want to produce,Then we will give you a quote based on this information.