Our Engine Cylinder Head Aluminum Gravity Casting is made of high grade aluminum alloy with good thermal conductivity, which is conducive to improve compression ratio.The Engine cylinder head aluminum gravity casting is mounted above the cylinder block, sealing the cylinder from the top and forming the combustion chamber. It is often in contact with high temperature and high pressure gas, so it bears a large thermal load and mechanical load. The Engine cylinder head can suck the air into the cylinder, the spark plug ignites the combustible mixture, and drives the piston to do work, and the exhaust gas is discharged from the exhaust pipe. It is also fitted with intake and exhaust seats, valve duct holes for mounting intake and exhaust valves, as well as inlet and exhaust channels. The engine cylinder head is one of the most critical parts in the engine, its precision requirement is high, the quality of machining directly affects the overall performance and quality of the engine. So our Engine cylinder head aluminum gravity casting can fully meet your demands. If you are interested, please feel free to contact us.
Place of Origin
Auto Cylinder Head
Sandblasting, painting, polishing
T6 heat treatment
A356 A360 AC2C
From 0.05kg to 20kg
Gravity Casting machine -23 Sets
Intake Manifold,Cylinder Head,Pump series
Supply capacity and package transportation
100000 Piece/Pieces per Month
Company strength profile
We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.
We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.
The air tightness detector is a gas booster pump with a boost ratio of 40:1, and its power source is 0.3-0.8mpa compressed air of the air compressor, rated output pressure is 12-32mpa.The device is equipped with a manual pressure regulating valve. By adjusting the driving pressure of the booster pump, the pressure of the high-pressure gas output of the booster pump can be adjusted step by step. The outlet is connected with a 3-meter high-pressure pressure measuring hose.The device is mainly produced according to GB/ t18437-2001 international 18.104.22.168 pressure testing platform.The device can be used for the pressure test of the refit pipeline of CNG automobile. It USES the gas booster pump with a pressurization ratio of 40:1 produced by our company to drive the compressed air with a pressure of 0.3-0.8mpa to produce the high-pressure gas of 12-2mpa.
We have professional testing personnel to use a variety of equipment to control the quality of products
We have a strong professional technical team and r & d strength, as well as a variety of certificates.