Die Casting and Investment Lost Wax Casting Parts Pump Housing

Die Casting and Investment Lost Wax Casting Parts Pump Housing

Die casting pump housing.Positive displacement pump is to rely on the working element in the pump cylinder for reciprocating or rotary movement, so that the working volume alternately increased and decreased, to achieve the suction and discharge of liquid.

Product Details

We are always ready to provide customers with thoughtful Large Displacement Intake Manifold, Aluminum Alloy Wheelchair Parts, Diesel Heavy Truck Exhaust Manifold solutions, products and services, and we can meet customer needs in a very short time. With your kind help, we believe that we can create a bright future with you together. We sincerely welcome customers from all over the world to order by phone or e-mail. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation. We are in line with the purpose of serving the public and striving for win-win to provide you with cheap and high-quality products.

Product description, features and application domain information

Die casting pump housing.Positive displacement pump is to rely on the working element in the pump cylinder for reciprocating or rotary movement, so that the working volume alternately increased and decreased, to achieve the suction and discharge of liquid.Working elements for reciprocating displacement pump is called reciprocating pump, rotary movement is called rotary pump.The former suction and discharge process in the same pump cylinder alternately, and by the suction valve and discharge valve to control;The latter is through gear, screw, vane rotor or sliding plate and other working elements of the rotating role, forcing the liquid from the suction side to the discharge side.Positive displacement pump in a certain speed or reciprocating times of the flow is a certain, almost does not change with pressure;Reciprocating pump flow and pressure have large pulsation, need to take the corresponding reduction pulsation measures;Rotary pump generally no pulsation or only small pulsation;With self-priming ability, the pump can pump the air in the pipeline after starting suction liquid;The discharge line valve must be fully opened when starting the pump;Reciprocating pump is suitable for high pressure and small flow;Rotary pump is suitable for small flow rate and high pressure;Reciprocating pump is suitable for conveying clean liquid or gas-liquid mixture.In general, positive displacement pump efficiency is higher than the power pump.

Basic Parameter

Place of Origin

Zhejiang, China

Brand Name


Model Number

Pump parts


Aluminum., Aluminum


A356 A360 AC2C

Heat treatment

T6 Heat treatment

Applied software

Auto CAD,Solid Work




ISO/TS16949: 2009

Surface finished

Sandblasting, Painting, Polishing, Poweder Coating

Machining equipments

Gravity Casting machine -23 Sets

Main products

Intake Manifold series,Cylinder Head series


OEM service available




customer required

Supply capacity and package transportation

2000 Piece/Pieces per Month

Packaging Details

With customers' orders



Company strength profile


We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.



We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.

Semiconductor and lamp pumped laser are using ND: YAG (neodymium-doped yttrium aluminum garnet) crystals as produced by the laser material, it can be converted to visible light of 808 nm 1064 nm invisible laser, but the output of laser another key factor is to make more crystal rods output laser pump sources are used, semiconductor pump is the use of semiconductor diode sent 808 nm wavelengths;The krypton lamp pumps the light from the krypton lamp, but the krypton lamp emits a broad spectrum of light, with a slightly larger peak at 808nm, and all other wavelengths of light end up emitting unwanted heat.

Quality control

We have professional testing personnel to use a variety of equipment to control the quality of products

The microscope USES high - speed electron beams instead of light beams.Since the wavelength of electron flow is much shorter than that of light wave, the magnification of electron microscope can be up to 800,000 times, the resolution of the minimum limit of 0.2 nanometers.Scanning electron microscopes, introduced in 1963, allow people to see tiny structures on surfaces.

The probe light emitted from a point source is focused through a lens onto the object being observed. If the object is just at the focal point, the reflected light should converge back to the source through the original lens. This is called confocal, or confocal for short.The Confocal Laser Scanning Microscope(CLSM or LSCM) adds a dichroic mirror to the reflected light path and folds the reflected light that has passed through the lens in other directions. There is a Pinhole in the focal point with the keyhole at the focal point and a photomultiplier tube (PMT) behind the flapper.As you can imagine, the reflected light before and after the focal point of the probe will not be able to focus on the hole through this confocal system and will be blocked by the baffle.So the photometer measures the intensity of the reflected light at the focal point.The meaning: a moving lens system allows a translucent object to be scanned in three dimensions.

Technical strength

We have a strong professional technical team and r & d strength, as well as a variety of certificates.


1.What do you mainly produce?

We only make aluminum products.Mainly is the automobile cylinder head, the intake manifold, the robot parts, the water pump fittings and each kind of aluminum industry parts.

2.What should I prepare if I have a product to produce and need to quote?

Tell us your annual consumption,Send us the 2d and 3d drawings of the product you want to produce,Then we will give you a quote based on this information.

We will devote ourselves to giving our esteemed buyers using the most enthusiastically thoughtful services for Die Casting and Investment Lost Wax Casting Parts Pump Housing. The sense of quality and competition makes every employee understand that the success of the company lies not only in the quality of our products, but also in whether the customers are satisfied with the services we provide. High quality products must be supported by excellent services. We are experiencing the leap from the industrial age to the data age, and the world is undergoing many earth-shaking changes.
Hot Tags: die casting pump housing, China, manufacturers, suppliers, customized, price, quality, cheap, made in China, 4 Cylinder Car Cylinder Head, Engine Cover Aluminum Automobile, Aluminum Gravity Casting Bracket, Aluminum Alloy Refueling Gun, Low Pressure Casting Exhaust Manifold, Die Casting Pump Casing

Send Inquiry

You Might Also Like