This kind of Low pressure casting intake manifold is a part of the intake system of the engine vehicle, which needs to provide a long flow path length in the limited space. Our casting intake manifold uses high grade aluminum to meet this requirement, contributing to higher overall engine performance. The intake manifold is fixed on the cylinder block or cylinder head with studs, and asbestos gasket is installed at the joint surface to prevent air leakage. Its function is to collect the exhaust gas from each cylinder and send it to the exhaust pipe and muffler, and then discharge into the atmosphere. Moreover, it can also change the length and cross-sectional area of the intake pipe, improve the combustion efficiency, and make the engine more stable and torque more sufficient at low speed. Our Low pressure casting intake manifold is widely used in automobile industry due to its excellent casting performance, corrosion resistance and high strength ratio. Also ,the dimensions can be customized according to your requirement. If you are interested, please read the details carefully and feel free to contact us.
Place of Origin
A356 A360 AC2C
From 0.05kg to 20kg
T6 Heat Treatment Continue
Sandblasting, painting, polishing,powder coating
CAXA, UG, CAD/CAM/CAE
Gravity Casting machine -23 Sets
OEM service available
With customers' orders
Supply capacity and package transportation
10000 Piece/Pieces per Year
Protective,bubble pack ,carton, pallet
Company strength profile
We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.
We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.
1. Check the appearance of pneumatic actuator.The valve surface shall be free from defects and cracks, and the valve body shall be free from blowout.
2. Valve tightness test.Under the condition that the valve is closed, the level gauge does not leak under the test pressure of 1.1mpa, and the pressure gauge has no pressure drop.The two sides of the valve are required to take turns to be pressurized and tested separately, and to open and close for several times to achieve the same effect;
3. Operating flexibility of valve.The flame arrester is still flexible and light in the case of multiple opening and closing of the valve by one person.
Test media: water, air, nitrogen, etc
We have professional testing personnel to use a variety of equipment to control the quality of products
We have a strong professional technical team and r & d strength, as well as a variety of certificates.