Product description, features and application domain information
Methanol automobile engine head is mainly used in methanol automobileMethanol comes from a wide range of sources. Methanol can be extracted from coal, wood or minerals. Therefore, its social comprehensive cost is lower than that of coal, wood or minerals.At the same time, methanol vehicle has strong power, thorough combustion and relatively clean emissions.Methanol, commonly known as "wood alcohol" or "wood extract", has been used to replace petroleum fuel in foreign countries for many years. The technology of methanol automobile control system has been very mature. Like ethanol, methanol has a low calorific value, but a high octane value and oxygen content.However, different from ethanol, methanol itself is toxic, corrosive to non-ferrous metals, and swelling to rubber parts. Therefore, specific design must be carried out for the fuel delivery and distribution system of the engine and vehicle.Such vehicles, which are designed to burn methanol fuel, are called methanol vehicles.
Place of Origin
Auto Cylinder Head
Sandblasting, painting, polishing
T6 heat treatment
A356 A360 AC2C
From 0.05kg to 20kg
Gravity Casting machine -23 Sets
Intake Manifold,Cylinder Head,Pump series
Supply capacity and package transportation
100000 Piece/Pieces per Month
Company strength profile
We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.
We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.
A smelting furnace that melts iron ore, such as hematite (Fe2O3) or magnetite (Fe3O4), into pigiron.The furnace body is a tall cylindrical structure with a refractory lining and is filled from the top with washing ore, coke, and a solvent (usually limestone).The transformation of iron oxide into metallic iron is a reduction process in which carbon monoxide and hydrogen are used as reducing agents.The first silicon carbide smelting furnace was invented by acheson in 1893. It was a rectangular container made of refractory bricks.It is equipped with silicon sand, coke and salt as the burden, two carbon electric insert into the furnace, carbon material furnace core is installed between the two electrodes, the generator connected to the electrode, large current through the furnace core to produce high temperature, the burden around the furnace core chemical reaction to produce silicon carbide, after cooling out the product.
We have professional testing personnel to use a variety of equipment to control the quality of products
Filter membranes A and B, made of A special polymer material, are placed in the same stainless steel container and immersed directly into the sampled water.Filter membrane A and filter membrane B are sucked into the transfer tube by their respective samples and are connected to peristaltic pump A and peristaltic pump B in the controller.The two peristaltic pumps work alternately;During the operation of a peristaltic pump, the sample is filtered through the corresponding filter membrane, and is extracted to the controller, and then transferred to the subsequent water quality on-line analyzer.
We have a strong professional technical team and r & d strength, as well as a variety of certificates.
1.What do you mainly produce？
We only make aluminum products.Mainly is the automobile cylinder head, the intake manifold, the robot parts, the water pump fittings and each kind of aluminum industry parts.
2.What should I prepare if I have a product to produce and need to quote?
Tell us your annual consumption,Send us the 2d and 3d drawings of the product you want to produce,Then we will give you a quote based on this information.