Diesel Engine Cylinder Head

Product Description

The Diesel engine cylinder head is an important part of engine. Its function is to seal gas and form combustion space together with the piston. The cylinder head is generally made of aluminum alloy, which has good thermal conductivity and is conducive to improving the compression ratio. The cylinder head is mostly used in diesel vehicles. By changing the size of the intake port of the diesel engine cylinder head and adjusting the installation angle of the fuel injector, sufficient air and fuel can be mixed more fully in the combustion chamber. The cylinder head is mounted above the cylinder block, sealing the cylinder from the top and forming the combustion chamber. It is often in contact with high temperature and high pressure gas, so it bears a large thermal load and mechanical load. The cooling water hole at the lower end of the cylinder head is connected with the water hole of the cylinder block. Circulating water is used to cool high temperature parts such as combustion chamber. Moreover, the cylinder head is also fitted with inlet and exhaust valve seats, valve guide holes, exhaust valves, as well as intake and exhaust channels. Choosing our Diesel engine cylinder head can improve engine performance and extend its service life. If you are interested, please feel free to contact us.

Basic Parameter

Supply capacity and package transportation

Company strength profile

Customer

We are now supplied to BEIQI,YUCAI,BRILLIANCE,GEELY,LIFAN and famous supporting enterprise ,products are exported to the United States ,Germany ,Brazil and other countries.

Process

We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.

Hot blasting cleaning machine is to use high speed rotating impeller will be shot to the drum in the continuous turnover of the workpiece, so as to achieve the purpose of cleaning the workpiece.It is suitable for sand cleaning, derusting, peeling and surface strengthening of castings and forgings under 15 kg in various industries.The technology of shot blasting cleaning machine replaces the general cold and hot forming technology, which can not only avoid the residual tensile stress on the surface of the parts, but also obtain the favorable compressive stress.It should be noted that the use temperature of the parts processed by the shot blasting machine should not be too high, otherwise the compressive stress will disappear automatically at high temperature, thus losing the expected effect.Their use temperature is determined by the material of the parts, for the general steel parts about 260-290℃, aluminum parts only 170℃.

Quality control

We have professional testing personnel to use a variety of equipment to control the quality of products

Technical strength

We have a strong professional technical team and r & d strength, as well as a variety of certificates.