We have accumulated a lot of experience in aluminum casting over the years.Each process has a professional staff to operate.
This technology is only used in the processing of individual parts, the application is not common enough, we should further improve the processing technology, optimize the grinding process parameters, expand the grinding processing scope;It is also necessary to perfect the grinding machine, improve the performance of the grinding machine, improve the shape of the grinding machine, and make it practical and commercial, so as to promote the application more widely.
There are two kinds of single disc and double disc, and the double disc grinding machine is the most common one.
In a double-disc grinder, a plurality of workpieces are simultaneously placed in a cage between the upper and lower grinding plates.The lower grinding wheel rotates so that the upper grinding disk parallel to it may not rotate or rotate in reverse with the lower grinding disk and may be moved up and down to press the workpiece (pressure adjustable).
We have professional testing personnel to use a variety of equipment to control the quality of products
DIN50021 describes the requirements to be met by instruments and etchants for salt spray corrosion testing in order to verify that the same conditions as salt spray testing can be reproduced in all cases under basic standards.
The standard of the sample, test duration or the outcome has nothing to do, unless there is a relevant specification, standard listed in the three methods in any single case should be considered as the main method, the standard of test is given to illustrate the effectiveness of the corrosion protection system adapt to and rapidly detect faults, he shall not apply to the more specific comparison matrix metal with the base metal coating test, even though this case, the substrate is connected coating protection, this test is a catalyst of corrosive of DIN 50900 part 3 test, has been testing the parts not directly provide information,Similarly, because the effects of corrosion during testing and the actual conditions that may occur during use may differ, and because the different corrosive processes that occur as a result are included, the performance of different corrosion protection systems can only be compared when conditions are sufficiently close.
We have a strong professional technical team and r & d strength, as well as a variety of certificates.
1.What do you mainly produce？
We only make aluminum products.Mainly is the automobile cylinder head, the intake manifold, the robot parts, the water pump fittings and each kind of aluminum industry parts.
2.What should I prepare if I have a product to produce and need to quote?
Tell us your annual consumption,Send us the 2d and 3d drawings of the product you want to produce,Then we will give you a quote based on this information.
Grade:A356 A360 AC2C
Applied software:Pro/E,Auto CAD,Solid Work ,CAXA
Surface finished:Sandblasting, painting, polishing
Heat treatment:T6 Heat treatment
Machining equipments:Gravity Casting machine -23 Sets
Main products:Intake Manifold series,Cylinder Head series
OEM service available
Application:machine spare parts
Dimensions:With customers' orders